J

Coloured handles for hydraulic hoses (1/2”)

From €27,35

Quantity Price per pcs.
1 - 7 45,57
8 - 15 41,01
16 - 30 38,73
31 - 45 34,18
46 - 60 29,62
60 + 27,34

Marking

For example, choose. +, -, or number

Text engravings

E.g. "support leg" or company name

Delivery time: 3-5 business days (in stock)

The price of shipping is calculated in the checkout.

Looking for help or a quote?

1/2'' BSP

1000 bar

Weather resistant

Coloured handles for hydraulic hoses with automatic dust protection

Marking, handling and maintaining hydraulic hoses couldn't be easier with our coloured handles. The handle is the smart alternative to manual cleaning, marking with coloured strips and poor handling of hydraulic hoses.

  • Our automatic protection prevents dust from settling on the quick coupling, so the tool is always 100% ready for use and will have fewer replacements of quick couplings, filters, gaskets etc.
  • Get clear markings that eliminate unnecessary switching due to hydraulic hose misassemblies. It saves time for all employees and is done without coloured strips, dust caps and cleaning of the quick connectors before each installation.
  • Get easy, fast and green handling with a solid grip andreduced hydraulic oil waste from leaking and worn quick couplings.

Do you have BSP or metric threads?

If in doubt, read more in our thread guide.

Montering på slange med 1/2'' BSP

Make sure the parts are clean, free of dirt and ready for assembly. Before mounting, lubricate the thread with grease according to. DIN 51825. Make sure all sealing surfaces are clean and intact.

Assemble the product by following 4 simple steps:

1. Start by removing the existing quick coupling that is mounted on the hydraulic hose.

2. Clean and lubricate the threads of the hydraulic hose.

3. Then fit the handle to the hydraulic hose (remember to use a sealing ring between the hose and the handle).

4. Tighten the handle on the hydraulic hose with a fork wrench, as per. the specified tightening torque of 82 nM.

Montering på slange med metrisk gevind

Make sure the parts are clean, free of dirt and ready for assembly. Before mounting, lubricate the thread with grease according to. DIN 51825. Make sure all sealing surfaces are clean and intact.

Assemble the product by following 6 simple steps

1. Start by removing the existing quick coupling that is mounted on the hydraulic hose.

2. Clean and lubricate the threads of the hydraulic hose.

3. Follow our Thread Guide to identify which fitting/nipple you need.

4. Fit the correct fitting/nipple to the hydraulic hose and tighten to the specified tightening torque of 82 nM.

5. Then fit the handle to the hydraulic hose (remember to use a sealing ring between the hose and the handle).

6. Tighten the handle on the hydraulic hose with a fork wrench, as per. the specified tightening torque of 82 nM.

Tips to extend the life of handles:

  • Be sure to rinse the product thoroughly with clean water after each tractor/implement wash to remove all excess soap.
  • Do not leave the product on the ground, but place them in a holder or hang them in a safe place on the tool.
  • Avoid spraying directly on both the bellows and the handle with a pressure washer.
  • When mounting, always make sure to lubricate the thread with the recommended lubricant and tighten with the recommended tightening torque of 82 nM.
  • Avoid dropping or throwing the product.

Get a good offer and the right guidance!

If you like our products and would like personal advice, please provide your contact details and we will call you with a good offer and the right advice.

Thank you very much. We will contact you as soon as possible!

0
Cart
Your cart is empty
Apply Coupon